CMSTC provides countersunk fastener slots that provide a lower screw head profile. CS, CMST and CMSTC are continuous utility straps which can be cut to length on the job site. Packaged in lightweight cartons (about 40 lb.)
- Material: 12 gauge
- Finish: Galvanized
- 40′ coil
- Gauge stamped on part for easy identification
- Use all specified fasteners; see General Notes.
- Refer to the applicable code for minimum edge and end distances.
- The table shows the maximum allowable loads and the screws required to obtain them. See table footnote #1. Fewer screws may be used; reduce the allowable load by the code lateral load for each fastener subtracted from each end.